A standalone background service for managing and monitoring a SolaX X3-HYB-G4 PRO hybrid inverter and a SolaX X1/X3-HAC EV charger. It operates entirely within the local network over Modbus TCP, with no cloud dependency, so polling is immediate and the data stays on the premises. It reads PV generation, battery state of charge and grid power flow, and uses them to drive EV charging and home-battery use from household surplus: charging the car on live solar, holding the battery back when the forecast says it will be needed, and targeting a departure time. A web UI is built in, and it can publish itself to Home Assistant over MQTT. The built-in web interface requires a password. A fresh installation serves only the page that asks you to set one, and shows no history and no controls until you have; it then asks you to sign in. Authentication can be switched off deliberately for an isolated network, which is not the default. The interface speaks plain HTTP, so it belongs on a network you trust or behind a TLS proxy. This build is free for any noncommercial purpose under the PolyForm Noncommercial License 1.0.0. Commercial use requires a separate licence -- see the LICENSE file.
What's new in 1.0.12
Install Debian, Ubuntu, Raspberry Pi OS (64-bit) Installs the controller and its web UI as a systemd service, started with the default configuration. Run it again to upgrade; settings and data are kept. curl -fsSL https://github.com/mpospisil/gleanvolt/releases/latest/download/install.sh | sudo sh Or by hand, choosing amd64 or arm64: wget https://github.com/mpospisil/gleanvolt/releases/download/v1.0.12/gleanvolt_1.0.12_arm64.deb sudo apt install ./gleanvolt_1.0.12_arm64.deb Then open http://<device>:8090 and set your inverter and charger addresses in /etc/gleanvolt/gleanvolt.env. Docker docker pull ghcr.io/mpospisil/gleanvolt:1.0.12 Or download a self-contained build below and run it — no .NET installation needed. gleanvolt-1.0.12-win-x64.zip for Windows, linux-arm64 for a Raspberry Pi, linux-x64 for an x64 Linux host or NAS. The .nupkg files are the libraries, for building on the controller directly. They are attached here rather than pushed to a feed. Verify your download SHA256SUMS covers every file here. From the directory you downloaded into: sha256sum -c --ignore-missing SHA256SUMS --ignore-missing because you have probably taken one file rather than all of them. On Windows, without installing anything: Get-FileHash gleanvolt-1.0.12-win-x64.zip -Algorithm SHA256 and compare it with the line in SHA256SUMS. PowerShell prints the hash in upper case; the file lists it in lower case, and they are the same hash. Each zip, .deb, install.sh and .nupkg also carries a build provenance attestation, which says which workflow run and which commit produced it rather than only that the bytes are unchanged. That needs no trust in this page: gh attestation verify gleanvolt-1.0.12-linux-arm64.zip --repo mpospisil/gleanvolt Changes - AppContext.BaseDirectory does not resolve through WinGet's alias symlink either (#252) - Forecasted drops the session energy target; an amount is what Targeted is for (#250) - Targeted min soc hint (#248) - Fold the header links behind a Menu button on phones (#247) - Say how to clear Fast's Ready by time (#246) - Say what Targeted's minimum battery SOC actually does (#245) - Keep a developer's local Worker data out of built images (#244) - Add a Nano Server smoke test for the WinGet win-x64 artifact (#243) Licence: free for any noncommercial purpose under the PolyForm Noncommercial License 1.0.0. Commercial use requires a separate licence — see LICENSE.
No, Gleanvolt is paid software from Martin Pospisil.
What is the latest version of Gleanvolt?
The latest version is 1.0.12, released on Oct 15, 2026.
Is it safe to download Gleanvolt?
The download button links to the official installer published on github.com, the same file Windows Package Manager installs. You can verify the downloaded file by comparing its SHA-256 checksum with baf9712e58b510c27b40bb609e4800019f9b8c1b049077414b3edd8a8e0eaf25.
Which Windows versions does Gleanvolt support?
Gleanvolt runs on Windows and is available for 64-bit (x64) systems.
How do I uninstall Gleanvolt?
Open Settings › Apps › Installed apps, find Gleanvolt and select Uninstall. From the command line, run winget uninstall --id=MartinPospisil.Gleanvolt -e.
Is there a portable version of Gleanvolt?
Yes. Gleanvolt is available as a portable ZIP archive (gleanvolt-1.0.12-win-x64.zip, 64-bit (x64)) that runs without installation. Copy it to any folder or USB drive and run it from there.
Alternatives to Gleanvolt
Other Utilities programs for Windows from different developers.
